alandesigns

Here is a look at what we will be making:

I have this problem every time I go grocery shopping: whenever I go down the cereal isle it takes me forever to pick out a box to buy. I’m so wrapped up in looking at the box design, especially those super tasty display logos! The other day I was caught staring at the new box of Lucky Charms drooling, not over the thought of marshmallowy moons and clovers, but over the beautiful new logo. So I set out to make one of my own in Adobe Illustrator. In the process I came up with some quick and easy techniques that look great! I am pleased to share them with you here.

If a real cereal logo designer happens by here, please give us insights!

I am using a Mac, and in this tutorial I will add shortcut commands, such as (cmd-F) for Paste in Front. PC users just substitute (ctrl) for (cmd) in most cases.

Step 1: Grab the Font

First thing to do is get a font to use. One great place to get free or buy quality fonts is from myfonts.com. The FREE font I grabbed for this tutorial is called   Mail-Ray-Stuff

Step 2: Type the Name

Using your new font, type out the name of your product.

Then separate and modify each letter following these steps:

1. Select the text
2. In the Menu, go Type > Create Outlines.
3. Right-click the text and select Ungroup (cmd-G).
4. Using the Selection Tool(V) rotate, nudge and reposition each letter just slightly, to make the text look more active.

Step 3: Create a “Plaque” for the Word to Display on

Now we need to make a big outline for your letters following these steps:

1. Select the letters and group them up again by right-clicking > Group or (cmd-G).
2. Copy it, and Paste Behind (cmd-B).
3. Using the Stroke Palette, give it a big stroke, any color, and aligned to the center.

Lock the original text for now, by selecting it and going Object > Lock > Lock Selection or (cmd-2).

Then follow these steps:

1. Select the outlined text
2. Go Object > Expand
3. Right-click the text and select Ungroup (cmd + shift + G)
4. In the Pathfinder Palette choose Add to Shape Area
5. Click Expand

Step 4: Patch Up the Inside

Let’s get rid of the white in the middle of the letters by following these steps:

1. Draw shapes to fill in the open areas.
2. Group them (cmd-G).
3. Select them and the outline shape and choose again Add to Shape Area from the Pathfinder Palette.
4. Click Expand.

Once you expand it, it will come to the front. To send it back where it was, right-click > Arrange > Send Backward (cmd-left bracket)

Step 5: Add a Gradient to the “Plaque”

Give it a vertical linear gradient by following these steps:

1. Make sure nothing is selected (click on an empty area of the stage).
2. Double-click the fill color icon in the Tools Palette, and enter a light blue color #29ABE2.
3. Drag the color from the Tools Palette into the color Swatches Palette so we have it for later.
4. Repeat, adding a darker blue #0071BC to the Swatches Palette.
5. Select the plaque (can I just call it that now? mkthx).
6. Activate the Gradient Palette, and drag the light blue swatch from the Swatches Palette onto the left side of the gradient, and the dark blue onto the right.
7. Using the Gradient Tool(G) drag from the plaque top to bottom, to perfect your gradient.

Step 6: Add Another Text Outline

Building upward from our base layer, let’s add another text outline by following these steps:

1. Go Object > Unlock all (cmd-option-2) to select the original text
2. Copy it and Paste Behind again (cmd-B)
3. Using the Stroke Palette, give it a stroke of any color besides black, so you can see it (I used red). Aligned to outside is fine.
4. Go Object > Lock > Lock Selection (cmd-2) on the original black text again, to preserve it for later.

Step 7: Color the Text Outline

Now let’s give your new text outline a light blue color by following these steps:

1. Select the outlined text and go Object > Expand Appearance, checking fill and stroke in the dialogue.
2. Right click > Ungroup (cmd-shift-G)
3. In the Pathfinder Palette, choose Add to Shape Area, like we did for the plaque.
4. Click Expand
5. Fill it with a light blue #88DBF2 (drag this color into your Swatches Palette to save it).

Step 8: Make the Text 3D!

One sweet effect in Illustrator CS3 is the Effect > 3D Tool. Let’s apply it to our text by following these steps:

1. Unlock the original text Object > Unlock All (cmd-option-2) to select it, and fill it with any color for now, I chose red.
2. Go Effect > 3D > Extrude and Bevel
3. Choose options similar to the following, feel free to play around here, making sure to check Preview to see what you’re doing.

Step 9: Color the 3D Letter Faces

Your 3D text might look pretty good the way it is, but I bet we can make the colors even nicer. To edit the colors we will need to break the 3D text into individual shapes. To do that follow these steps:

1. Select the 3D text and go Object > Expand Appearance
2. Right click > Ungroup (cmd-shift-G). That will separate each letter block.
3. We want to get at just the face of each letter though, so select all the letters again and right click > Ungroup once more.
4. Now select all the letter faces and group them, and give them a vertical linear gradient color bright red #FF0000 on top to dark red #7A0009 on bottom

Step 10: Color the 3D Letter Blocks

There’s not quite enough shadow on what’s behind the letter faces, so let’s darken the block part of each letter:

1. Select all the pieces of the letters besides the faces. Zoom in and make sure you get them all; there might be some that are hard to see.
2. Group them (cmd-G)
3. Grouping them will cause them to move in front of the letter faces, so right click > Send Backward (cmd-left bracket) to place them back where they were.
4. Fill them 3D with a darker red #44000A

Step 11: Create Highlights

The real magic in a good logo is in the details. We can really sharpen this one up by adding highlights to the letters. Here is a relatively quick and easy way to make them, but is our most complex set of steps thus far:

1. Copy the letter faces (only) and Paste in Front (cmd-F).
2. Nudge the copied faces to the right a few (2) taps.
3. Select both sets of letter faces and in the Pathfinder Palette choose Subtract from Shape Area, then Expand.
4. Aack! where did my text go? Don’t worry, It’s still on your clipboard so just Paste Behind (cmd-B).
5. Select your highlights and fill them with our bright red #FF0000.

Step 12: Adjust the Highlights

Pretty close but not quite done! With the Direct Selection Tool (Y) select the points of any awkward highlights and adjust them to line up correctly.

Awesome! The main part of your logo is done, now let’s add more juicy text to describe your product

Step 13: Add Secondary Text

Well? What kind of cereal is it? Loops, Crisps, Nuggets, or what? Let’s go with PUFFS! Start it out just like the beginning:

1. Type the word “Puffs” using the same font.
2. go Type > Create Outlines.
3. Right-click > Ungroup (cmd-G).
4. Rotate, nudge and reposition each letter.

Step 14: Give it a Puffy Stroke

This one needs a plaque to sit on as well, but we’ll make this one rounded and puffy looking:

1. Group the letters up again, Copy and Paste Behind (cmd-B). Lock the PUFFS text on top (cmd-2).
2. Give it a big stroke, any color for now. Align the stroke to the outside and make it big enough to fill the inside.

Step 15: Color the Puffy Plaque

Alright this one needs a background gradient color too. Let’s give it the same color as the other plaque by following these (familiar) steps:

1. Go Object > Expand Appearance, right click > Ungroup, and in the Pathfinder Palette choose Add to Shape Area, then Expand, like we did for the first plaque.
2. Choose the eyedropper tool (I) and click the other plaque to copy its gradient colors.
3. Use the Gradient Tool (G) to adjust the gradient to your liking.

Step 16: Puff out the Top PUFFS Text

Now we can style the original PUFFS text. Let’s add a bit of roundness to it:

1. Unlock the text. Object > Unlock All (cmd-option-2).
2. Give it a 1pt. stroke, aligned to the outside, with rounded corners
3. Then do our familiar step: Object > Expand Appearance, right click > Ungroup, and in the Pathfinder Palette choose Add to Shape Area, then Expand.

Step 17: Create Puffy Highlights

Before we get to coloring the text, let’s make the highlights. The technique here is similar to the other highlights, but we will go an extra few steps:

1. Copy your new PUFFS shape and Paste in Front (cmd-F).
2. Nudge it to the right one or two taps.
3. Caution: when you nudge the word over it may overlap the letter to its right. Use the Direct Selection Tool (Y) to adjust the shape on top so it doesn’t overlap.
4. Select both PUFFS shapes and in the Pathfinder Palette select Subtract from Shape area, then Expand.
5. Use the Direct Selection Tool to delete any little straggling pieces.

Step 18: Refine the Highlights

First of all Paste in Back (cmd-B) your copied PUFFS text and fill it with white. Now we can work on the highlights a bit more and get rid of the over-hanging top portion:

1. Nudge the highlights over to the right one tap.
2. Copy the PUFFS text and Paste in Front (cmd-F), then Right-Click > Arrange > Bring to Front (cmd-shift-right bracket).
3. Nudge the text down one tap
4. Select the text and the highlights and in the Pathfinder Palette choose Intersect Shape Areas, then Expand.

Step 19: Refine the Highlights More

Fill the new highlight shape to see what you have, but we will repeat this step to remove the over-hanging bottom portion of your highlights:

1. Copy the PUFFS text again and Paste in Front (cmd-F), then bring it to the front.
2. Nudge the text up one tap this time.
3. Select the text and the highlights and in the Pathfinder Palette choose Intersect Shape Areas, then Expand.
4. Now you can color your finished bevel effect with the light blue #88DBF2.

Step 20: Position PUFFS in the Logo

Lookin’ good yet? Let’s get PUFFS in the logo:

1. Select the blue plaque behind PUFFS and give it a white stroke, aligned to the outside, and about 5pt.
2. Position PUFFS the way you like under your logo.

Step 21: Warp the Logo

When you are happy with the logo so far, select both words and go Object > Warp > Make with Warp and give it an Arc with about a 13% Bend, like the image below. Make sure to check Preview to see your changes.

Step 22: Finishing Touches

Your logo is done!

Go ahead and add some background elements if you like. I made some clouds and rays but I encourage you to come up with your own!

Thanks for following my tutorial! I hope you learned lots from this.

How did you like this tutorial? Was it easy to follow? Tough to follow? Did I screw anything up? Your feedback is gold!

The effects and techniques demonstrated in this tutorial can be used however you like, I’d sure appreciate a link back though! The text and images in this tutorial itself are copyright of www.alandesigns.com and may not be distributed.